Hashprice, also written hash price, is a Bitcoin mining metric that shows the revenue one unit of hashrate is expected to bring in over a day, averaged across the whole network. Hashprice combines the BTC price, the block subsidy, transaction fees, and total network hashrate, and is quoted in US dollars per day for each petahash or terahash per second (USD/PH/day or USD/TH/day).
Hashprice and hashrate sound alike, but they measure different things. Hashrate is the speed at which a machine, or the whole Bitcoin network, computes hashes. Hashes are the trial calculations that miners run while they compete to add the next block. Hashprice is the revenue that one unit of that speed is expected to bring in over a day, so it works like a going rate for hashrate rather than a speed.
How Is Bitcoin Hashprice Calculated?
Hashprice is calculated in four steps:
- Count the blocks in a day. Bitcoin targets one block every 10 minutes, which comes to about 144 blocks a day.
- Add up the block rewards for those blocks. Each block reward is the block subsidy plus the transaction fees in that block. The block subsidy is the new BTC created with each block, which has been 3.125 BTC since April 2024. The fees are what users paid to have their transactions included in that block.
- Divide that daily Bitcoin mining reward by the total network hashrate in petahashes per second (PH/s). The result is BTC per PH/s per day. One PH/s equals 1,000 terahashes per second (TH/s), and one TH/s is one trillion hashes per second.
- Multiply by the BTC price. This step turns the result into US dollars per PH/s per day.
Dividing a USD/PH/day hashprice by 1,000 gives the expected revenue per TH per day, because one PH/s is 1,000 TH/s, and that smaller scale fits a single machine.
Bitcoin hashprice is quoted in two currencies. The USD figure moves with the BTC price. The BTC figure, in BTC per PH/s per day, leaves the price out and moves only with the subsidy, fees, and network hashrate. A quoted hashprice can use either currency, so it’s worth checking which one a figure uses before comparing it with another.
Data providers that track Bitcoin mining publish hashprice as a running series that updates with each new block, sometimes called a hashprice index. According to Hashrate Index, a data service from the mining pool operator Luxor, hashprice was $39.71 per PH/s per day in mid-October 2026, which is about $0.0397 per TH/s per day. Hashprice figures from different providers can differ slightly, because the providers average fees and estimate network hashrate in different ways.
What Makes Hashprice Rise and Fall?
The BTC price moves the USD hashprice directly. A higher BTC price raises the USD hashprice on the same day, and a lower price cuts it.
Network hashrate pushes hashprice down when it rises. When more machines join the network, the same daily reward is split across more PH/s, so each unit’s share falls and hashprice falls with it.
Bitcoin mining difficulty is the setting that controls how hard a block is to find, and it reflects how much hashrate is competing for blocks. The network recalculates difficulty every 2,016 blocks so that blocks keep arriving about 10 minutes apart. When difficulty rises, each PH/s finds blocks less often, so hashprice falls unless the BTC price or fees rise to offset it.
Transaction fees add to the block subsidy in every block. Busy periods with high fees lift the block reward, and hashprice rises with it, while quiet periods add little.
The Bitcoin halving is a scheduled cut in the block subsidy. Every 210,000 blocks the subsidy halves, and with everything else unchanged, the subsidy part of hashprice halves from that block on. At the April 2024 halving, the subsidy fell from 6.25 BTC to 3.125 BTC.
Hashrate Index put hashprice at about $107 per PH/s per day in mid-April 2024, a few days before the April 2024 halving. By late April 2024, less than two weeks after the halving, hashprice had fallen below $50 per PH/s per day. The next Bitcoin halving is set for block 1,050,000, when the subsidy falls to 1.5625 BTC.
How Do Miners Compare Hashprice with Their Costs?
Hashprice is the revenue side of the economics of Bitcoin mining. To use it, a miner sets hashprice against the cost of running one TH/s for a day, and the first cost to check is electricity.
The Bitcoin mining electricity cost per TH/s depends on the machine’s energy efficiency, measured in watts per terahash (W/TH). W/TH is the power a machine draws for each TH/s of hashrate, and it works like a car’s fuel consumption, where lower is better. Spec sheets often list the same number in joules per terahash (J/TH).
Multiplying a machine’s W/TH by 24 hours gives watt-hours per TH/s per day, and dividing by 1,000 converts that figure to kilowatt-hours (kWh). Multiplying the kWh figure by the electricity price per kWh gives the machine’s daily electricity cost per TH/s.
Two Bitmain machines show how much the daily electricity cost per TH/s, and so the gap between that cost and hashprice, depends on energy efficiency. According to Bitmain’s spec sheets as of October 2026, the Antminer S21 XP is rated at 270 TH/s and 3,645 W, or 13.5 W/TH, while the older Antminer S19 XP is rated at 141 TH/s and 3,031.5 W, or 21.5 W/TH.
The example electricity price for both machines is 9.64 cents per kWh. It is the US Energy Information Administration’s preliminary estimate of the average price for industrial customers in August 2026. That price is a national average for industrial customers, not a rate set for Bitcoin mining.
| Measure | Antminer S21 XP | Antminer S19 XP |
|---|---|---|
| Energy efficiency (W/TH) | 13.5 | 21.5 |
| Electricity use per TH/s per day (kWh) | 0.324 | 0.516 |
| Electricity cost per TH/s per day at 9.64 cents per kWh, August 2026 ($) | ~0.0312 | ~0.0497 |
| Hashprice per TH/s per day, mid-October 2026 ($) | ~0.0397 | ~0.0397 |
| Break-even electricity price at the mid-October 2026 hashprice (cents per kWh) | ~12.3 | ~7.7 |
At the August 2026 US industrial average of 9.64 cents per kWh, the Antminer S21 XP’s electricity cost about $0.0312 per TH/s per day, less than the mid-October 2026 hashprice of about $0.0397 per TH/s per day. At the same 9.64 cents per kWh from August 2026, the Antminer S19 XP’s electricity alone cost about $0.0497 per TH/s per day, more than that mid-October 2026 hashprice.
The break-even electricity price is the price per kWh at which a machine’s electricity cost equals hashprice. It equals hashprice per TH/s per day divided by kWh per TH/s per day. With the mid-October 2026 hashprice of about $0.0397 per TH/s per day, that arithmetic gives a break-even price of about 12.3 cents per kWh for the Antminer S21 XP and about 7.7 cents per kWh for the Antminer S19 XP. Both break-even prices move whenever hashprice moves, so they describe only that mid-October 2026 snapshot.
Electricity is not the only Bitcoin mining cost. Hosting, pool fees, maintenance, and the price of the hardware itself all sit on the cost side, and a comparison of hashprice with electricity alone leaves every one of them out.
What Hashprice Does Not Tell You
Hashprice is an expected average for the whole network over one day, not a payment that anyone receives. A miner’s actual Bitcoin mining payout usually differs from hashprice.
The mining pool’s payout method is the first thing that separates hashprice from what a miner is paid. A mining pool is a group of miners that combine their hashrate and split rewards in proportion to the work each one contributes. A pool counts that work in shares, which are solutions that meet a lower difficulty than a block needs. Pools find blocks at an uneven pace, and the ups and downs in how many blocks a pool finds are called variance.
Pay per share (PPS) pays a fixed amount for every share from the pool’s own balance, whether or not the pool finds a block, so the pool carries the variance. Full pay per share (FPPS) works the same way but also pays an estimate of the transaction fees for each share, based on the fees of a recent period, so the pool carries the variance for the fees as well. FPPS pools usually charge a slightly higher fee because they carry that variance.
Pay per share plus (PPS+) pays the block subsidy as a fixed amount for every share, as PPS does, but pays transaction fees only from blocks the pool actually finds, so the pool carries the variance on the subsidy and the miner carries it on the fees. Pay per last N shares (PPLNS) pays only when the pool finds a block and splits that block’s reward, fees included, across the last N shares submitted, so the miner carries the variance in how many blocks the pool finds.
Pool fees, downtime, and curtailment also reduce a miner’s payout compared with hashprice. A pool charges a fee on what it pays its members. Curtailment means a miner switches machines off on purpose to cut power use. A machine that is switched off, whether for curtailment or any other downtime, computes no hashes and receives no mining rewards for that time.
A machine’s real hashrate can differ from its spec sheet, so multiplying hashprice by a machine’s rated TH/s gives only an estimate of the revenue expected from that machine. As of October 2026, Bitmain lists the Antminer S21 XP’s 270 TH/s as a typical value with a tolerance of plus or minus 3%.
November 16, 2026











